Arai VX-Pro4 Solid MX Offroad Helmet (M2020D) Black Frost SM

Gender: Mens/Unisex
Helmet Category: Offroad
Helmet Type: Offroad Helmets
Color: Black Frost
Size: Small
Market Color: Black Frost
Primary Color: Black

The peak of this helmet is 14mm longer and 5mm wider than the VX-PRO3. Larger relief ports allow more air to escape from under the larger peak to minimize lift/pulling at speed. The chin vent incorporates expanded SS mesh that is moved from the inside to the outside of the shell. providing room to move the EPS chin liner forward to allow more room in the face area. The chin vent has a round and smooth mesh cap to resist snagging and digging and is easily removable with a single screw. that will breakaway. if necessary. in an impact. The Inner Mud Gate can be easily removed for more airflow. The liner components feature FCS cheek pads that have a larger surface area. wrapping under the jaw for more comfort. A removable. replaceable. washable neck roll pad. and 5mm peel away cheek pads and temple pads. The ventilation consists of six upper vents. an upper and lower rear exhaust vent cowl. designed to boost airflow and vacuum exhaust. vents designed to assist holding goggle strap in center position and not slide off. up or down. and an upper rear exhaust vent set designed to accommodate all five shell sizes. Vent is fragile under crash impact. but more durable against smaller contact. It has the identical three basic chin intakes. two under peak intakes. six upper exhaust and two lower exhaust. The eye port trim and material has formed rubber trim across the top of the eye port. standoff ribs that assist reduce liner wear from goggles while also providing a small gap for airflow and formed goggle strap guides at either side of the eye port trim..
Red and black material accent colors for a tri-color interior.
Emergency Cheek Pad Removal strap label design for easier utilize; label acts as pull tab for strap.
Meets or exceeds Snell and D.O.T. standards.

• The shell itself is consistently round and smooth. maintaining the R75 Shape concept in areas above the acunderstandledged test line and influencing those below the test line. Here. the rounded chin bar maintains the identical compact shell length as the previous model. the VX-Pro3. The result is less protrusion. which has proven to be less likely to catch and dig in during a spill.
• In order to maximize performance. we precisely assemble the shell from multiple proprietary components. Super Fiber. one of the primary materials. costs up to six times more than standard fiberglass but provides 30% higher tensile strength and boostd penetration resistance. The cLc (complex Laminate construction) method demands precise and time-consuming assembly by master craftsmen from many individual pieces.
• Installed on the uniquely rounded chin bar. the stainless mesh grill is now mounted from the outside on the exterior vent cap and can be easily removed for cleaning or damage replacement. The vent cap is also designed to break away from the chin bar in the event of impact.
• The Air-Through top-rear-duct center brace also functions as a goggle-strap locator. The diffutilizers can be removed or replaced rapidly and easily by removing a single screw on the rear-duct center brace.
• DOT FMVSS No. 218 Certified